Category
- Aircraft Cable
- Alloy Chain & Fittings
- Beams
- Beam Clamps
- Beam Trolleys
- Blocks
- Cable Pullers
- Cargo Control Products
- Chain
- Chain Connectors
- Chain Falls
- Cordage
- Custom Slings & Tie Downs
- Cutters
- Drum & Canister Lifters
- Eye Nuts & Eye Bolts
- Gold-Tip® Premium Cargo Control
- Hooks
- Hose Restraints
- Latch Kits
- Lever Hoists
- Lifstar Lever Hoists and Chain Falls
- Load Binders
- Logging Supplies
- Master Links
- Oilfield & Gas Field
- Premium Ratchet Load Binders
- Pulleys
- Rings
- Rope
- Shackles
- Slings
- Snaps
- Sockets
- Specialty Chain
- Stainless Steel
- Swage Fittings
- Swaging Tools
- Swivels
- Synthetic Web Products
- Thimbles
- Tie-Downs
- Tire Chains
- Tools
- Towing & Recovery
- Trailer Safety
- Trolleys
- Turnbuckles
- V-Chain Bridles
- Weld-On Components
- Winch Lines
- Wire Rope
- Wire Rope Clips
- Wire Rope Fittings
- X100® Grade 100 Chain & Hardware
Specifications
STOCK NUMBER | SIZE (TON) | WEIGHT (LBS.) |
---|---|---|
XEHH100LKi | 1 | 0.025 |
XEHH150LKi | 1.5 | 0.03 |
XEHH200LKi | 2 | 0.035 |
XEHH300LKi | 3 | 0.04 |
XEHH500LKi | 5 | 0.065 |
XEHH700LKi | 7 | 0.12 |
XEHH1100LKi | 11 | 0.20 |
Included in the Kit
Instructional Video
- Remove old damaged latch kit and discard
- Open the Latch Kit bag and remove and count the contents on a flat and level surface
- There should be the following items enclosed:
- 1 Stamped Steel Latch
- 1 Latch Spring
- 1 Bolt
- 1 Nylon Insert Lock Nut
- 1 Cotter Pin
- Place spring onto the hook.
- Set Latch onto the spring and line up the holes of the latch, spring and hook.
- Set latch and spring in place with the latch tip on top of the hook. Hold latch/spring continuously in place with one hand otherwise spring will eject the latch.
- Put bolt through one side of the latch/spring and all the way through the hook. NOTE: While pushing bolt through the hook, the tip of the bolt should catch the other side of the spring, WITHOUT pushing through the other side of the latch. The depth of the bolt is important for the next step.
- Adjust and rotate the latch from top of hook into correct placement under the tip.
- Push bolt completely through the latch.
- Fasten the nylon insert lock nut onto the bolt until snug. NOTE: Do not over-tighten.
- IMPORTANT SAFETY WARNING: Latch kits are only designed as a method to hold other rigging products in place. DO NOT place any load on the latch kit. Failure to follow this warning could result in property damage, serious injury or death.